- At most 28 kg of metallic copper per hectare over seven years, an average of 4 kg/ha/year, whatever the purpose (plant protection or fertilisation).
- The EU approval of copper compounds now runs to 30 June 2029, with the same condition.
- In France, some product authorisations (AMM) also cap use at 4 kg Cu/ha per year: the label tells you whether you can smooth between years.
- Your spray register must show the running total: quantities applied and quantity left, per area.
The EU rule
Commission Implementing Regulation (EU) 2018/1981 renewed the approval of copper compounds from 1 January 2019, listing them as candidates for substitution. Its specific provision is short: only uses resulting in a total application of at most 28 kg of copper per hectare over a period of seven years are authorised. Recital 15 of the same regulation translates the cap into an average of 4 kg/ha/year.
The first seven-year period ran from 2019 to 2025. The annex to Implementing Regulation (EU) No 540/2011, in its consolidated version of 21 July 2026, extends the approval to 30 June 2029 and keeps the same 28 kg/ha over seven years condition.
The cap is expressed as metallic copper, all forms combined (hydroxide, oxychloride, sulphate, Bordeaux mixture, cuprous oxide). The French authorities point out that it applies to plant protection and fertiliser uses alike.
Two statements on French authorisations
In France, not every marketing authorisation (AMM) was rewritten at the same time. The DGAL information note of 13 October 2023 (MI-2023-002) describes two families of valid authorisations:
| Statement on the authorisation | What it allows |
|---|---|
| Spe1 phrase: do not apply this product or any other copper product at a total annual dose above 4 kg Cu/ha | A strict yearly cap of 4 kg Cu/ha for products carrying that same phrase. |
| Only uses resulting in a total application of at most 28 kg of copper per hectare over seven years are authorised | Smoothing between years: a year above 4 kg/ha is possible if the total over the period stays under 28 kg/ha. |
The DGAL states that smoothing remains possible even when one of the sprays used a product with the Spe1 phrase, provided at least one application in the year used a product carrying the 28 kg over seven years statement. The Spe1 phrase is then read as applying only to products that carry that same phrase.
In practice: before planning a heavy year, check the statement of each of your products on E-Phy, the official database of the French agency Anses. Conditions of use can change when an authorisation is renewed.
Calculating metallic copper
The cap applies to metallic copper, not to the quantity of product. The calculation fits on one line:
metallic copper (kg/ha) = product rate (kg or l/ha) × copper content
Example: 2 kg/ha of a Bordeaux mixture at 20 % copper applies 0.4 kg of metallic copper per hectare. Ten such sprays make 4 kg/ha over the season. The copper content is on the label and in the product record on E-Phy; for liquids, it is often given in grams per litre.
Keeping the count, plot by plot
The DGAL asks that spray registers hold the information needed to check the rule, in particular a precise count of the quantities used on a given area and of the quantity still available. In practice:
- For each spray, record the product, the rate actually applied and the area treated.
- Convert each pass into metallic copper per hectare and add them up per plot over the season.
- Keep the totals of previous seasons: what counts is the sum over seven years, not the current year alone.
- Before a wet year, work out how much you have left under the cap and check your products' statements.
The texts do not spell out how the seven-year period is counted after 2025. Following a running total over the last seven seasons is the most cautious reading; if in doubt, ask your chamber of agriculture or the regional agriculture directorate (DRAAF).
And in organic farming?
The same rules apply. The French Ministry of Agriculture notes that the organic-specific smoothing option (30 kg/ha over five rolling years for perennial crops) was removed in December 2019. Since then, copper conditions have been identical in organic and conventional farming, and set by the product authorisations.
A French version of this guide, with the original wording of the texts, is available: Le cuivre en viticulture.
Frequently asked questions
Can I apply more than 4 kg of copper per hectare in one year?
It depends on the statement in the product's French marketing authorisation. With a product whose authorisation caps the total annual dose at 4 kg Cu/ha, no. With a product whose authorisation only sets the 28 kg/ha over seven years limit, yes, as long as the total for the period stays under that cap. The DGAL information note MI-2023-002 explains how the two fit together.
Are copper rules different in organic farming?
No. Since the organic rules were amended in December 2019, copper conditions are the same in organic and conventional farming: those set by the product authorisations, within the EU limit of 28 kg/ha over seven years.
How do I calculate the metallic copper applied by a spray?
Multiply the product rate per hectare by its copper content. For example, 2 kg/ha of a product containing 20 % copper applies 0.4 kg of metallic copper per hectare.
What Bacchus does for you
When you dictate a spray, I record it in the register with the product's copper content from E-Phy, the official French database, and I keep the count for you.
- The metallic copper total for each plot, for the season and over seven years, calculated from your register.
- An alert when a plot goes over the 4 kg/ha yearly average or the 28 kg/ha seven-year cap.
- For any product, its copper content and conditions of use, with the source.
I flag; the choice of a treatment stays with you and your adviser.
Presentation webinar (in French): Monday 23 November 2026, 10 am Paris time, online and free.
Sources
- Commission Implementing Regulation (EU) 2018/1981 of 13 December 2018 renewing the approval of copper compounds, recital 15 and Annex I. EUR-Lex
- Commission Implementing Regulation (EU) No 540/2011, Annex Part A, entry "copper compounds", consolidated version of 21 July 2026. EUR-Lex
- DGAL (French Ministry of Agriculture), information note MI-2023-002 of 13 October 2023 on the annual cap for copper-based plant protection products (in French).
- French Ministry of Agriculture, « Questions / réponses : l'utilisation du cuivre en agriculture », 2 April 2020 (in French). agriculture.gouv.fr
- Anses, E-Phy, French catalogue of plant protection products and their uses. ephy.anses.fr
Texts consulted on 16 October 2026. This guide summarises the regulations to help you find your way; it does not replace the official texts or the advice of your adviser, your customs office or your appellation body.